Faqs - Anchorite Fixing Technology (AFT)
- Home
- Faqs
The best fasteners used with very heavy loads are usually mechanical anchors e.g. wedge anchors or chemical anchors, high-strength chemical anchors, since you want as much load-bearing capacity as possible.
A large range of them, such as mechanical anchors, chemical anchor, wedge anchor, sleeve anchors and flange bolts, each suited to diverse construction and industrial applications.
The carrying capacity of the fasteners may differ depending on their type and size. Each type of fastener could be given more details that would imply their acceptable weight and the carrying capacity during installation.
Yes, most of the fasteners can be made of stainless steel or some coated materials to be less susceptible to corrosion and durable.
Wedge anchors are most commonly applied to solid concrete, but may be applied to masonry or stone where suitable.
Yes, even though wedge anchors are best in solid concrete we can give special attention and suggestions to masonry.
Yes! Our engineer will give instructions, trouble shooting and advice as to how to install and perform optimally.
We do have contractor and wholesale rates on large-scale projects and business.
Yes! They are ideal in medium and heavy applications like building supports, machineries and fixtures.
Sleeve anchors are a type of fastening employed in construction which is an expanding type of fastener that is designed so that once the anchor bolt has been screwed on, the fastener will embed itself firmly into concrete, brick and block.
They are effective in concrete, brick, and block that are widely used substances in the construction industry.
Pierce the correct hole, remove the debris of the hole, pierce the sleeve anchor and tighten the nut. The nut is tightened and the sleeve anchor will stretch tightly against the sides of the hole that is drilled.
Bullet fasteners suit best in solid concrete, brick, and block applications and thus will be useful both in construction and industry.
Our bullet fasteners are manufactured out of stainless steel or coated materials so that they will not rust and become durable over time.
When they are well installed, bullet fasteners may serve many years, even when in heavy-duty or difficult environmental use.
Select according to the base material thickness, requirements of the load and the hole diameter. Our specialists will be able to assist in choosing the appropriate size.
Yes, our nylon anchors do not corrode, and are meant to serve the purpose of working in the outdoor, damp, or wet environment.
Yes! We offer bulk and wholesale to the contractors, builders, and commercial projects at competitive prices.
They can be used in applications of light to medium duty such as window and door frames, partitions, and internal fixtures.
Indeed, our nylon anchors are non-corrosive and meant to function in the outdoor conditions that are damp or wet.
An alignment is done through templates, layout guides or pre-drilled holes. After installation, the anchor rods are to be installed according to the instructions to be placed in the best possible position to withstand the maximum load.
Yes. Anchor rods are suitable in high rise and multi-story buildings due to their capacity to support heavy loads and give stable locking of structural components.
In comparison to the wedge or sleeve anchors, anchor rods are loaded, threaded rods that are used in heavy-duty structural uses. They may be fixed on concrete or masonry offering a long-lasting adjustable connection.
Absolutely. Anchor rods are fabricated to support heavy loads and they are usually applied in industrial systems to fix heavy machinery, the base of equipment and the structure.
Our concrete screws are precisely engineered, built to last. It doesn't matter if you're fastening into brick, block, or solid concrete, each screw is strictly quality controlled in our pre-distribution facility to ensure you are supplied with a 100% global standard—guaranteeing fastens will be done with strength and confidence.
Yes! We offer a comprehensive range of concrete screws—flat head, self-drilling, heavy-duty screws, and much more— all available in various sizes to accommodate both minor residential undertakings to major industrial projects alike.
Certainly. We are a concrete screw wholesale supplier in Delhi, and bulk pricing is provided to all of our clients without quality compromise. Our wholesale suite guarantees your projects time-frames, and consistent performance regardless of project scale.
Our applications are endless—indoors and outdoors, concrete screws are suitable for fastening wall plates, handrails, ventilation supports, and heavy structural applications to name just a few. Again, whether it is a residential location, or commercial construction site, with our concrete screws you can always fasten with confidence.
We have granite, marble, sandstone, limestone, and engineered stone panels that are compatible with our clamps that offer us a variety of architectural design flexibility.
Absolutely. Stone cladding clamps have been applied in exterior and interior construction both high rise buildings and stone cladding of exterior and interior construction with its strong design and strong grip.
Installation requires a very specific location, tightening, and compliance with the requirements of the manufacturers. The application of templates and level guides will maintain alignment of panels and their safe installations.
Yes, we have clamps that are applicable to both vertical and horizontal surfaces as well as the complicated architectural facades that need special orientations.
Before drilling, the correct amount of torque must be applied and matched nuts or washers should be used to ensure maximum holding strength and extended service.
Absolutely. We provide contractors, manufacturers and industrial clients with competitive prices in large quantities and wholesale.
Absolutely. We also provide corrosion resistant and stainless steel material that can be used in outdoor, coastal and high humidity.
We have a large variety of hex bolts, carriage bolts, machine screws, self-tapped screws, wood screws, lag bolts, and specialty fasteners in applications of industrial, commercial, and residential.
Our products are diverse in nature providing forged bolts, nuts, studs, pins, brackets, and special fasteners with specific automotive use.
This is selected based on the type of vehicle, load, positioning within the vehicle and the environment. Our professionals give advice so that the right component is selected.
The parts are subjected to intense testing such as tensile strength, fatigue, torque and corrosion tests to guarantee optimum performance under real automotive situations.
Part testing is also done extensively and it includes tensile testing, fatigue testing, torque and corrosion testing of the components to give the highest possible performance of the parts in real world automobile applications.
